MP720 Microprecision Switches
- Sealed position switch with positive opening operation, dual breaking, and with direct connection by cable molded into the housing
- The MP720 positive opening position switch is a dependent-action, changeover, double-gap, contact element, which is connected by means of a cable directly overmoulded into the housing.
- The degree of safety sought on a machine often depends on the reliability of a switch, especially during an emergency shutdown, these switches provide a guarantee of safety thanks to the switch's positive opening operation and rigid mechanical linkage between the controller and the contact bridge causing the breaker circuit to open.
MP720-0-1GALA/41
MP720 switch with Stainless Steel Roller Plunger and Thread with 1 meter (3.28 ft) PVC Cable |
MP720-0-1GACPV/43
MP720 Emergency Switch with push button and 3 meter (9.8 ft) PVC Cable |
MP720-1GL-43
MP720 switch with Stainless Steel Roller and 3 meter (9.8 ft) PVC Cable |
|
Switch Rating Standard Standards device confirms with Degree of Protection Class of Protection Complies with Standards Terminal Temperature Switching Diagram Mechanism Mechanical Life Frequency of operation Electrical Protection Gold Contact Dimensions Connection Thermal Current Housing Sealing Membrane Circuit Power Rating Termination |
250VAC 6A EN 60947-1 / EN 60947-5 IEC947-5-1 IP67/IP68 II EN60947-1 as VDE 0660 part 100 EN60947-5 as VDE 0660 part 200 cable PVC/PUR/SI Connector AS-1 -40°C to +130°C / -40°F to +266°F positive opening forced break / slow action 10x10^6 3600 operations per hour 6A gl according to VDE 0636 yes 30 x 51 x 16mm / 1.18 x 2 x 0.63 in DIN 43695, EN50047, and NFC 63-145, class Y2 Cable directly overmoulded to the housing section 4 x 0.75mm^2 6A PBT glass fiber reinforced, Auto-extinguishing according to UL94V-O Chloroprene rubber CR 1NO + 1NC 240VAC: AC-15 3A 250VDC: DC-13 0.27A Cable molded 0.75mm^2 PVC -20°C to +70°C PUR -40°C to +90°C SI -40°C to +130°C |
